|IDEA BY:||David Ray Gillard||LOCATION:||Canada||CATEGORY:||Environment/Sustainability|
|IDEA BY:||David Ray Gillard|
So what if there was a way to mix Electromotive force with Centrifugal force and export them to make a new combined force. Only half of a familiar, Grand Unification Theory. (of which I believe Albert succeeded with proving, but wisely chose not to share. After all He deeply regretted sharing E=MC^2 since it led to our nuclear carelessness, and we all know hindsight is 20/20.) Well if we look at some numbers lets see where they take us. Rcf=1.1178xrad(mm)x(rpm/1000)^2 Rcf=1.1178x100mmx(1000/1000)^2 = 111.78 Newtons, Rcf=1.1178x100mmx(2000/1000)^2 = 447.12 Newtons, Rcf=1.1178x100mmx(4000/1000)^2 = 1788.48 Newtons, Rcf=1.1178x100mmx(8000/1000)^2 = 7153.92 Newtons, So if we rotate a 100mm radius disk @2000 rpm we get 447.12 Newtons and by simply increasing the Rpm to 8000 rpm we get 7153.92 Newtons of Force/Energy which is a 1600 % increase in output of the machine over 6000 rpm differential. Now if we can mix this force and export it electrically off the spinning disk, I see that we would have all the power an energy hungry world would ever need. and clean and no heat and no burning of our precious oxygen and no emissions and on and on. These numbers only reflect 100mm out. As you can see if we calculate the total potential of the entire volume of the disk and it were possible to extract 100% of the Force. We could enter into a new era in the energy sector for our Planet. The following Picture is 1 of approx. 115 God given concepts/devices I have built with this primary design consideration. With every rcf electrical extraction failure. I get from the Good Lord new design paths to follow. a right of passage maybe? Psalm 32:8 "I will instruct you and teach you in the way you are to go. I will counsel you with My loving Eye upon you" Thank you God for keeping your promises. And it is through trial and error and by method of socratic reasoning that you teach me. I am greatful to be this far on the journey...but some... help would really be speed things along... just a thought.